How to use REVIVE
@ Detail manual : Read the Manual_portablewin.pdf file on REVIVE USB Drive.
1. In case of executing on BIOS(USB Booting)
a. Plug a USB device to a computer.
b. Turn on the computer
c. Boot from the USB device.
: Refer to bios manual
d. Select either [1. Backup] or [2. recovery] depending on REVIVE menu.
2. In case of executing on windows
@ Note : Your boot menu is modified permanently as the following image.
[ b - d ] Steps initially execute only once
a. Plug a USB device to a computer(on working windows).
b. Execute ITsoulREVIVEStart_nobios.exe from usb drive.
c. Click "AUTO-START REVIVE" button from ITsoulREVIVEStart_nobios program.
d. After a while, A computer reboot and shows the following image.
e. Choose 'ITsoul REVIVE' and press 'Enter' and then it shows following screen.
f. Select either [1. Backup] or [2. recovery] depending on REVIVE menu.
@ If you can't execute ITsoulREVIVEStart_nobios.exe, Check the following :
(If it happens execution-problem at Vista and Windows7, You must do as Administrator.)
Attention
In case of "MBR sector" or harddisk's physical damage, You can't use this function.(Only You can use [1. In case of executing on BIOS])
3. In case of use ITsoulCreator (Only software buyer)
In case of Windows XP, Microsoft .net framework 2.0(x86) (or over) must be installled.
3-1.Prepare USB flash or SSD or HDD disk.
REVIVE Portable :
A) Prepare a 8GB(or over) USB flash,ssd,hdd disk and make it partitioned into two.
B) The primary partition should be more than 500MB and FAT32 formatted.
C) The secondary partition should be ext3 or NFTS and formatted.
* These jobs can be done by ITsoulCreator.
Revive Light, Clone :
A) Prepare USB flash,ssd,hdd disk and FAT32(FAT)(500MB over).
3-2. Download ITsoulCreator.zip and insert your usb disk(Flash, ssd, hdd) and uncompress and execute ITsoulCreator.exe
In case of vista, win7 : Click the right button of mouse on ITsoulCreator.exe -> Run as administrator
In case of vista, win7 : If you see the following screen, Click [ Cancel ].
Formatting is executed automatically.
3-3. how to build REVIVE
3-4. After Booting your pc from REVIVE-USB, You can see the following screen.
@ Go to [ 1. In case of executing on BIOS ] or [ 2. In case of executing on windows ]
|
|
|
